ASTM A106 Q195/Q235/Q345 Seamless Carbon Hot Rolled Steel Pipe DN 500 Inch Steel Pipe Carbon Steel Pipe

ASTM A106 Q195/Q235/Q345 Seamless Carbon Hot Rolled Steel Pipe DN 500 Inch Steel Pipe Carbon Steel Pipe

Product Description


　　ASTM A500 Carbon Steel Structural Tubing

　　Superior construction projects require materials that can withstand numerous environments and a variety of extreme conditions. High strength A 500 carbon steel structural tubing from Shengtian Group provides the high-end framework and skeletal support for projects of all sizes.

　　Shengtian Group offers A500 structural steel tubing in a range of sizes and shapes. The ASTM A500 specification covers cold-formed welded and seamless

　　carbon steel round tubing

　　carbon steel square tubing

　　carbon steel rectangular tubing

　　and “special” carbon steel shapes for welded, riveted, or bolted construction applications, as well as for general structural purposes.

　　ASTM A500 Carbon Steel Structural Tubing Benefits

　　A500 Carbon Steel Structural Tubing provides several advantageous qualities that make it a highly sought after construction material for structural load bearing applications. Some of the most recognizable beneficial qualities that A500 Carbon Steel Structural Tubing provides includes:

　　A500 Steel Advantages

　　Excellent weldability

　　Good machinability

　　Can be cold worked

　　Aesthetically pleasing

　　ASTM A500 Carbon Steel Structural Tubing Specifications & Requirements

　　The ASTM A500 specifications state that manufactured carbon steel tubing must meet certain specifications before being sold for any type of project. The A 500 carbon steel spec sheet provides a convenient and simple way to check material standards before beginning your next project.

　　A500 Carbon Steel Manufacturer Specifications

　　ASTM A500 spec states that welded tubing shall be made from flat-rolled steel using electric-resistance welding. Longitudinal butt joints of welded tubing shall be welded across its thickness in such a manner as to assure the structural design strength of the tubing section. Welded structural steel tubing is typically furnished without the removal of inside flash.

　　A500 Carbon Steel Material Component Properties

　　A500 carbon steel structural tubing is only manufactured from materials that match the criteria for carbon steel. The chemical composition for A500 is mostly iron with added carbon, manganese, phosphorus, sulfur, and copper. Check out the chart below for exact A500 carbon steel chemical specifications.

　　ASTM A500 Carbon Steel Permissible Dimensional Variations for Outside Dimensions

　　Outside diameter measurements for A500 carbon steel tube must be made at positions at least 2” (50.8mm) from either end of the tubing.

　　For round structural tubing with nominal OD of 1.900” (48.26mm) and smaller, the outside diameter may not vary more than ±0.5%, rounded to the nearest 0.005” (0.13mm), of the specified size. For nominal ODs of 2” (50.8mm) and larger, outside diameter may not vary more than ±0.75%, rounded to the nearest 0.005”.

　　Square structural tubing and rectangular structural tubing must be measured across the flats and include an allowance for convexity or concavity. Specified dimensions shall not exceed the plus/minus allowances shown in the table below.

　　A500 Outside Dimensional Tolerances for Square & Rectangular Steel tubing

　　There are multiple considerations that must be accounted for when determining the outside dimensional tolerances for square and rectangular steel tubing. The chart below and the following attributes describes the exact outside dimensional tolerances for A500 carbon steel.


Packaging & Shipping

　　1. wood pallet packing cover with water-proof paper

　　2. steel pallet packing cover with water-proof paper

　　3. wood box packing

　　4. steel pallet packing cover with steel box

　　5. in bundles with steel strip no extra packing

　　6. packaged as customers' requirments.